Citation. 

 Interpretation. 

1. These regulations may be cited as the Malaysia-Thailand Joint Authority (Standards of Petroleum Operations) Regulations 1997. 
2. In these Regulations, unless the context otherwise requires – 

Submission of information on exploration activity for approval. 

Restriction on Petroleum Operation. 

Prevention of leakage, etc. 

 Drilling of any well using rotary drilling method. 

Restriction of drilling proposal, etc. for approval. 

Submission of drilling proposal, etc. for approval. 

5. The Contractor shall take all necessary precautions, in accordance with good petroleum industry practice, to – 

(a)   prevent leakage or seepage of petroleum into the sea or on the sea-bed; 

(b)  prevent spilling of toxic fluids or toxic chemicals into the sea; 

(c)   prevent damage to shallow fresh-water-bearing strata or subsurface water aquifer; 

(d)  prevent damage to petroleum-bearing strata or formations; and 

(e)   prevent entrance of water through wells to petroleum strata or formation, except where water is used in second stage production or for the purpose of maintaining the pressure at petroleum deposits. 

6. In drilling any well, using rotary-drilling method, the Contractor shall – 

(a)   install a blowout-preventer equipment and its readily accessible control panel, where necessary in accordance with good petroleum industry practice; 

(b)  properly and periodically test and maintain such blowout preventer in good working condition at all times while drilling is in progress; and  

(c)   ensure that there is, at all times while drilling, adequate quantity and weight of, as well as good quality, drilling fluid in the well or available on the rig so as to balance against fluid pressure in underground formations and prevent blowout of formation fluids from underground. 

7. (1) The Contractor shall not drill any well the well-path of which goes beyond or outside the vertical boundary of the Contract Area. 

(2) No well shall be drilled, except with the prior written approval of the Joint Authority, inside ant Contract Area so that any part of the well is less than one hundred and twenty-five (125) metres away from the vehicle boundary of the Contract Area. 

8. (1) The Contractor shall, in advance and in any case not less than 72 hours, submit in writing to the Joint Authority for review and approval, drilling proposal and programme of each well. 

(2) The Contractor shall not, without the prior written approval of the Joint Authority – 

(a)   commence drilling of any well in any Contract Area; or 

(b)   recommence drilling of any well that has been suspended. 

Location of 

drilling rig, etc. and establishment of safety zone. 

Contractor to provide reliable communication system. 

Safety at drilling rig etc. 

Installation of fire fighting system. 

Notification of any accident or incident. 

10. (1) Any drilling rig, platform, or other offshore installation shall be located at a safe distance in accordance with good petroleum industry practice from other drilling rigs, platforms, offshore installations, lighthouse, navigation marks, subsea cables and pipelines, as the case may be. 

(2)                  The Contractor shall – 

(a)   with prior written approval of the Joint Authority establish a reasonable safety Zone around the drilling rigs, platforms or other offshore installations; 

(b)  ensure that the radius of such safety zone shall not exceed a distance of five hundred (500) metres around the drilling rigs, platforms or other offshore installations; 

(c)   take all necessary measures to ensure within such safety zone safety of navigation and of the drilling rigs, platforms or other offshore installations; and 

(d)  give due public notification of the extent of such safety zone, 

11. The Contractor shall ensure that all vessels, aircrafts, drilling rigs, platforms or other offshore installations used or engaged, as the case may be, in Petroleum Operations are equipped with reliable communication system, in accordance with good petroleum industry practice, which is capable of  relaying information or messages to and from the Contractor’s onshore office, and that can be used by the Contractor or governmental authorities as a means of communications in case of an emergency. 

12. The contractor shall take all necessary steps to ensure safety at every drilling rig, platform and other offshore installations used or engaged, as the case may be, in Petroleum Operations. 

13. (1) The Contractor shall ensure that necessary, adequate and reliable fire fighting system is installed on well vessels, aircrafts, drilling rigs, platforms or other offshore installations used or engaged, as the case may be, in Petroleum Operations. 

(2) All fire fighting equipment shall be properly maintained and kept in operable condition ready for immediate use at all times. 

14. (1) The Contractor shall notify the Joint Authority of ant accident or incident arising from or in relation to Petroleum Operations that has resulted in a serious injury or loss of human life, or damage to properties or to the environment.   

Suitable protective working uniforms for workers. 

First Aid Facilities. 

Contractor to provide accommodation, meals, etc. 

Maintenance of register of personnel records.  

Survival crafts, life rafts and other saving appliances. 

       (2) Such notice shall be made promptly within 72 hours of the happening of the     accident or incident, and such notice shall include – 

(a)  adequate details of the accident or incident including their nature, damages and loss; and 

(b)  immediate measures being taken by the Contractor to deal with the situation. 

15. The contractor shall ensure that all workers working on all drilling rigs, platforms, or other offshore installations are provided with, and property wear, suitable protective working uniform including safety helmet, boots, gloves, glasses and other necessary protective materials. 

16. The Contractor shall ensure that all the medicine, medical equipment, and trained medical personnel necessary for First Aid treatments are provided at every manned drilling rig, platform and other offshore installation to render immediate First Aid to workers who are involved in accidents or who fall sick.   

17. The Contractor shall provide adequate clean living quarters, safe and whilom food and drinking water and water for other sues, lights and hygienic toilets for workers at every manned drilling rig, platform and other offshore installation. 

18. (1) The Contractor shall – 

(a)   maintain an up-to-date register of personnel records on board every manned drilling rig, platform and other offshore installation; and 

(b)  in such register include but not limited to, records of workers’ names identification, contact address, age, nationality, and next-of-kin. 

(2) The Contractor shall – 

(a)   ensure that any worker entering or leaving such drilling rig, platform or other offshore installations has his name and record updated promptly in the register; and 

(b)  keep such register in safe place with a copy transmitted regularly to the contractor’s onshore office, and ensure that they shall be made available for inspection  upon request by the Joint Authority. 

19.     (1) The Contractor shall ensure that every manned drilling rig, platform and other offshore installation is provided on board with survival crafts, life rafts and other life-saving appliances having sufficient capacity to all persons on such drilling rig, platform and other offshore installation for use in case of emergency. 

(2) Such survival crafts, life rafts and other life-saving appliances shall be properly maintained and regularly tested, and kept in operable condition ready for immediate at all times.